Cuttable linear fixtures offer flexible solutions for lighting designs — but cutting them incorrectly can damage the product or affect performance. At SARIN, we’ve created clear UNF Cutting Instructions to help you get perfect results every time.
In this article, we’ll walk through the key steps and best practices for cutting your UNF fixtures safely and accurately.
Why Proper Cutting Matters
UNF linear fixtures are engineered with internal circuit boards and electrical connections spaced at precise intervals. Cutting outside the designated cut marks can:
- Damage the LED circuitry
- Cause uneven light output
- Void your product warranty
Following the proper cutting guidelines ensures your fixture remains safe, functional, and covered by warranty.
Step-by-Step Cutting Guidelines
- Locate the Cut Marks
Each UNF fixture has clearly marked cut points printed on the housing. Always cut only at these points to maintain electrical integrity. - Power Off the Fixture
Before handling or cutting, disconnect all power to avoid electric shock or accidental damage. - Use Proper Tools
Use a fine-tooth saw or sharp cutting tool designed for aluminum channels. Avoid crushing or bending the housing while cutting. - Secure the Fixture
Clamp the fixture gently to a stable work surface. This prevents movement while cutting and ensures a clean, straight edge. - Deburr and Clean the Edge
After cutting, remove any burrs or debris from the cut end to ensure a smooth surface for end caps and connectors. - Install End Caps and Seal (if applicable)
Finish by installing end caps or protective covers on the cut end. This helps protect internal components and gives a clean, finished look.
Safety Reminders
- Never cut through live electrical wiring
- Always wear safety glasses and gloves
- Double-check that voltage is disconnected before beginning work
Need More Help?
Cutting UNF fixtures doesn’t have to be intimidating. By following these steps, you’ll get precise results and preserve the performance of your lighting system.
For a copy of our official UNF Cutting Instructions or to speak with our technical support team, contact us at (855) 997-2746 or info@sarinenergy.com
